NEW OCT 0035 EDM Drill on REFURBISHED Turret Mill Base PRODUCT INFORMATION SHEET AN104	£8,000   240V Single Phase. Easy to operate. Good for drilling start holes for wire cut EDM. Good for deep hole drilling on super hard alloy and powder metallurgical steel materials. Designed for small, large and irregularly shaped material fine hole drilling. Suitable for removing broken taps or drill bits. 2 Banks parameter data 2 axis DRO
£6,000 240V Single Phase. Easy to operate. Good for drilling start holes for wire cut EDM. Good for deep hole drilling on super hard alloy and powder metallurgical steel materials. Designed for small, large and irregularly shaped material fine hole drilling. Suitable for removing broken taps or drill bits. 2 Banks parameter data	NEW OCT 0035 EDM Drill PRODUCT INFORMATION SHEET AN104
NEW ALIC-1 Tool Type EDM BROCHURE	£8,000 The basic EDM. device ALIC-1 can be held on to spindle which processes a collet chuck direct. By means of Z and X. Y Axis of machine tool itself, this device will become an E.D.M.
£17,000 10 Sets working coordinates for setting (including machine coordinates). 10 banks parameter setting data, Each set can save various machining parameters. Parameter data condition can be finely adjusted. Suited for a range of machining operations. The unit can also use preset parameter data for easy operation. Auto/Manual searching workpiece surface. Auto/Manual electrode compensating function. Metric/Inch conversion. Display 3 axes or last machining value. Flexible control box design for convenient increase of functionality, and the elimination of signal interference. Great compatibility.	DEMO OCT 3525ZA EDM Drill WITH TILTING HEAD   PRODUCT INFORMATION SHEET
REFURBISHED OMEGA CM800ZNC/50A EDM Drill 0.2-6.35mm dia. PRODUCT INFORMATION SHEET	£4,500   Machining depth: Electrode diameter =300:1 Excellent for drilling super hard tungsten materials, hard alloys and powder metallurgy steels. Drills spherical, curved and tapered surfaces. Minimum electrode wear ratio. Accommodates brass and copper electrodes. Wire cut start hole and mould tool hole processing. Stainless steel worktable. Variable spindle speed as standard.
£6,000   Beige polypropylene, one piece with access panels. Lift-up see through door, operating Start/Stop. 12V Operating Voltage Overcurrent & Short Circuit protection. Pump: For electrolyte delivery with flow control.	150A ECD Machine REFURBISHED
500A ECD Machine REFURBISHED	£10,000   Beige polypropylene, one piece with access panels. Lift-up see through door, operating Start/Stop. 5-20 Volts. Constant Voltage or Current Modes. Overcurrent & Short Circuit protection. Pump: For electrolyte delivery with flow control. Rectifier: State of the Art Microprocessor controlled Thyristor unit. Control Panel: Voltmeter, Ammeter, Pump Speed Meter, Emergency Stop Switch, Mains Indicator, Alarm Lamp & HMI
£15,000   Beige polypropylene, one piece with access panels. Lift-up see through door, operating Start/Stop. 5-20 Volts. Constant Voltage or Current Modes. Overcurrent & Short Circuit protection. Pump: For electrolyte delivery with flow control. Rectifier: State of the Art Microprocessor controlled Thyristor unit. Control Panel: Voltmeter, Ammeter, Pump Speed Meter, Emergency Stop Switch, Mains Indicator, Alarm Lamp & HMI	1000A ECD Machine REFURBISHED
DR. BENDER KR550 DRILL + SEM 50L MAG STAND USED	£500 KR550 Power Consumption 1700W Voltage 240V Speed 1 60 rpm Speed 2 115 rpm Speed 3 220 rpm Speed 4 450 rpm Speed 4 450 rpm Morse Taper 4 MT Approx. Weight 21 kg SEM 50L Drilling capacity in steel 50mm Maximum Stroke 300mm Magnetic Pull 2000 kp Overall Height 630mm Magnet dimension 104x270 Axial Adjustments 30mm Radial Adjustment 350 deg Nett Weight 34 kg
£300 Heavy Duty Motor Electronic Variable Speed in 2 geared ranges 110V	UNIBOR MAG DRILL USED